Polycarbonate Covers
Assembly of Polycarbonate Roofs
Polycarbonate Covers
We set up continuous covers or combined with panel insulation. Translucent, cellular, U.V. protected and fire rated polycarbonate. bS1d0.
- Light transmission.
- Longitudinal overlap and transverse overlap.
- Thermal insulation.
- Sun factor.
- Lightning resistance.
- Translucid material
At Cover Industrial we recommend the installation of polycarbonate roofs in Barcelona for different reasons:
• Translucent material
• Light transmission
• Longitudinal overlap and transverse overlap
• Thermal insulation
• Solar factor
• UV resistance
If you are looking for a polycarbonate roofing installation in Barcelona for your new project, at Cover Industrial we have a wide range of services to offer you.
At Cover Industrial we would like to inform you on a small scale about polycarbonate roofs and possible doubts you may have.
The polycarbonate roofs we are going to talk about are ideal for surfaces where you want to obtain solar illumination while being protected from the sun's UV rays.
What is a cover?
A roof is a structure that encloses a construction / building on the upper part, its main function is to offer protection to the building, it is given by both thermal and acoustic insulation, thanks to the roof the building is protected against climate agents and any other factor outside.
Composition of our polycarbonate roofs and benefits
In order to install polycarbonate roofs in Barcelona, we must take into account how polycarbonate roofs are composed and what benefits we obtain with the materials we use.
The polycarbonate roofs we use can be installed as a continuous roof or combined with polyurethane or rock wool sandwich panels or in-situ sandwich roofs.
The Polycarbonate we use is translucent, cellular, UV protected and fire rated bS1d0, by this we mean the following things:
Polycarbonate is a type of thermoplastic which is quite flexible and tough with exceptional resistance to impact, weathering and climate change.
As they are translucent, they allow sunlight to pass through to the interior of the building surface and at the same time the people living in the building are protected from the ultra violet rays of the sun, which can damage the integrity of the building over time.
Regarding the fire classification we observe that our polycarbonate is classified with the code bS1d0 this code has a meaning which we will explain in the following way:
The first letter indicates the reaction to fire of the material in terms of flammability in this case is b, which refers to a fire caused by liquids, e.g. a petrol can.
Regarding the letter and number S1 refers to the degree of opacity of the smoke, these are classified in 3 degrees, S1, S" and S3, in this case it is S1 and that means that the smoke emission and the speed at which the smoke particles are spread is very low, however if it is S3 they are spread very quickly which would be worse.
Regarding code d0, it refers to the droplets or particles released by the material that burns, in this case, being d0, there is no droplet that will be released if the polycarbonate catches fire, in the case of being d2, for example, droplets would be released which, when in contact with people, would burn the skin.
Finally, it should be noted that the materials used are also insulating.
Our polycarbonate roofs are normally used for flat roofs.
At Cover Industrial we have committed professionals and years of experience in the sector.
We have a technical department that is responsible for all the points of the project.
We have the most innovative machinery in the sector for the installation and assembly of polycarbonate roofing in Barcelona.
Our projects follow rigorous quality controls endorsed by a certifying company.
If you are looking for a polycarbonate roof assembly in Barcelona, please contact us and we will provide you with the necessary information.
